Lumatek ZEUS 1000W Xtreme PPFD CO2

The most powerful grow light on the market is here!
The Lumatek Zeus 1000W Xtreme PPFD CO2 LED. With 1.5×1.5 meter coverage and supplemental CO2 for optimal efficiency and results, this lamp is designed to set the standard for horticultural lighting higher than ever before.

The Lumatek Zeus 1000W Xtreme PPFD CO2 LED is a linear multi-light bar fixture that produces extremely high levels of PPF of 2925 µmol/s and a very high efficiency of up to 2.9 umol/J. The efficiency of the fixture may vary depending on the input voltage used.

As pioneers of the innovative, modular, magnetic LED light bar design, Lumatek offers high-quality LED horticultural lighting that offers significant payback to growers. Our full-spectrum horticulture LED solutions balance light quality (spectra) with light quantity (intensity and duration) to ensure balanced light distribution and uniform dispersion.

The Zeus 1000W Xtreme PPFD CO2 produces extremely high levels of light intensity that requires the use of supplemental CO2 for those planning to grow in 1.5×1.5 meter large areas with short distances from the crown to the light.

Using CO2 with this fixture is not mandatory, but if you choose to use it without CO2, we recommend keeping a greater distance from the crown to the light. This provides the optimal PPFD levels according to growth stages. Using the latter method, the expected optimal coverage area becomes 1.8×1.8 meters but with lower levels of PPFD intensity concentration.

Supplementing with carbon dioxide (CO2) in your controlled environment can significantly improve your crop yield if used properly. As a general rule, if you exceed 1000 µmol/s/m2 PPFD levels, be 1:1 with CO2 PPM – up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be safest to start with).

The new Zeus line is made with high-quality Lumatek drivers and the latest generation of top bin LEDs from Lumileds and Osram. This generates a full-spectrum light source ideal for vegetative and flowering cycles. Another new feature of this line is the Clear Glue protection cover technology on the LED bars, which achieves higher light transmittance of 99% without light loss, extended diode life, additional corrosion resistance and high water resistance of IP65. For basic maintenance, simply clean the bars with a damp cloth.

For different cultivars, propagation and vegetative growth periods, Zeus can be dimmed without decreasing efficiency. The high efficiency and low LED configuration with 10 LED bars reduces LED temperature, increasing output and improving light maintenance.

External control
This Lumatek LED fixture can also be controlled externally with a Lumatek digital lighting controller (Digital Panel Plus 2.0) with light control, automated dimming (1% steps), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Compatibility with universal controllers
Lumatek LED fixtures can be fully controlled using the Lumatek Digital Panel Plus 2.0 or any other control system that uses a 0-10V output signal. Even if your universal controller has an RJ port interface, you can still use our LEDs by using a signal converter RJ to 0-10V control adapter.

Key specifications:

• Product code: LUMLED003
• Yield: up to 2.9 µmol/J
• PPF: 2925 µmol/s
• Input voltage: 220-240V, 50-60Hz
• Input power: 1025W (±5%)
• Footprint: 1.5×1.5m with CO2 supplement;
• 1.8×1.8m without CO2 supplement at higher altitudes.
• Waterproof: IP65
• Lifespan: 60 000 hours
• Light distribution: 120°
• Light source: high specific Osram and Lumileds diodes
• Dimmable: %-100% with 0-10V light dimmer (included)
• External control: With Lumatek Digital Panel Plus 2.0
• Weight: 18 kg
• Dimensions: 1181.2x1091x105.7 mm
• Spectrum: Full spectrum F
• BTU (with driver connected): 3668 BTU/h (max)
• BTU (with driver removed): 3411 BTU/h (max)