Adjust-a-wing shade Medium, complete with fitting and spreader

Adjustable double parabolic reflector.

Adjusting the reflector is done with a stainless steel cable through the keyholes in the shade. This stretches the hood like an arc from wide to deep beam. Due to the perfect double parabolas created after mounting, there is a better and wider distribution of light and better even dissipation of heat around the lamp.

Flexible glass-coated aluminum.
On the inside of the reflector plate, a thin, flexible layer of glass is applied to the aluminum. This precious processing makes the aluminum 97% reflective and protects the aluminum from corrosion. This ensures reflection for many years. Maintenance is easy by just cleaning with a soft cloth and glass cleaner.

Gives wider, equal distribution of light

By adjusting Adjustawings with the cables, you can make a deep-radiating reflector and a wide-radiating reflector. If the lamp is suspended high above the crop, a deep beam is needed to intensely illuminate a larger area. But as the lamp gets closer to the crop, the shade must be wider to illuminate a wider area.

So the canopy high above the crop, becomes more curved, like a deep radiator. The lower on the crop (up to 20 cm from the crop), the more the canopy should be open or wide, as a wide beam, to illuminate the outer edges of the area as well. All of this, of course, is in conjunction with the use of Super Spreader.

Adjustable lamp holder.

When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder allows fine tuning of light distribution.