Reflectors

Who doesn't know him, the familiar mirror cap. Easy to hang and good quality.

Read more less

The old trusted hammer cap. works perfectly for 400w, 600w single end bulbs.

Read more less

The mirror cap is designed for a better distribution of light with 1 lamp. The light is reflected by a mirror, which produces an excellent result. It is an ideal hood for growing rooms, equipped with a fitting and easy to assemble. When placing the lamp in the hood, you must make sure that you tighten the lamp properly (not too tight). If the lamp does not work, always first turn the lamp off and back in the fitting, you will see that the problem has often been solved. Megalux Mirror Cover is even better than the normal mirror cover. This is because with this hood the side of the hood is also fitted with reflectors. As a result, the hood is used in its entirety and the light is distributed even better.

Read more less

The hammered shade is a shade that is made for a better distribution of the light. The higher you hang the lamp, the more surface it will cover. Please note that you do not hang the hood too high in order to use fewer hoods. It is an ideal hood for growing rooms, equipped with a fitting and easy to assemble. When placing the lamp in the hood, you must make sure that you tighten the lamp properly (not too tight). If the lamp does not work, always first turn the lamp off and back in the fitting, you will see that the problem has often been solved. Megalux hammer cap is even better than the normal hammer cap. This is because with this hood the side of the hood is also fitted with reflectors. As a result, the hood is used in its entirety and the light is distributed even better.

Read more less

Is the cover of your Dimlux 1000w damaged or simply no longer optimal? Then it is smart to replace it with a new one.

Read more less

Is the hood of your Dimlux 315w or 600w damaged or simply no longer optimal? Then it is smart to replace it with a new one.

Read more less

Why are the Adjust-A-Wings the best reflectors? Adjustable double parabolic reflector. The adjustment of the reflector is done with a stainless steel cable through the keyholes in the hood. As a result, the hood is stretched like an arc from wide to downlight. Due to the perfect double parabolas, which are created after installation, there is a better and wider distribution of the light and better even heat dissipation around the lamp. Flexible glass-coated aluminum. A thin, flexible layer of glass is applied to the aluminum on the inside of the reflector plate. Due to this costly processing, the aluminum is 97% reflective and the aluminum is protected against corrosion. This guarantees reflection for years to come. Maintenance is easy by just cleaning with a soft cloth and glass cleaner. Gives a wider, even spread of light By adjusting Adjustawings with the cables you can make a deep-beam reflector and a wide-beam reflector. If the lamp hangs high above the crop, a downlight is required to illuminate a larger surface intensely. But when the lamp gets closer to the crop, the hood must be wider to illuminate a wider area. So the hood, high above the crop, is more curved, like a downlight. The lower on the crop (up to 20 cm from the crop), the more the hood must be open or wide, as a floodlight, to also illuminate the outer edges of the area. All this is of course in combination with the use of Super Spreader. Adjustable lamp holder. When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder ensures fine tuning of the light distribution.

Read more less

Why are the Adjust-A-Wings the best reflectors? Adjustable double parabolic reflector. The adjustment of the reflector is done with a stainless steel cable through the keyholes in the hood. As a result, the hood is stretched like an arc from wide to downlight. Due to the perfect double parabolas, which are created after installation, there is a better and wider distribution of the light and better even heat dissipation around the lamp. Flexible glass-coated aluminum. A thin, flexible layer of glass is applied to the aluminum on the inside of the reflector plate. Due to this costly processing, the aluminum is 97% reflective and the aluminum is protected against corrosion. This guarantees reflection for years to come. Maintenance is easy by just cleaning with a soft cloth and glass cleaner. Gives a wider, even spread of light By adjusting Adjustawings with the cables you can make a deep-beam reflector and a wide-beam reflector. If the lamp hangs high above the crop, a downlight is required to illuminate a larger surface intensely. But when the lamp gets closer to the crop, the hood must be wider to illuminate a wider area. So the hood, high above the crop, is more curved, like a downlight. The lower on the crop (up to 20 cm from the crop), the more the hood must be open or wide, as a floodlight, to also illuminate the outer edges of the area. All this is of course in combination with the use of Super Spreader. Adjustable lamp holder. When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder ensures fine tuning of the light distribution.

Read more less

Think of this as the budget version of the Adjust-a-wing. Great reflector, for a perfect price!

Read more less

Voorkom reflectieverliezen met de Dimlux Ultra Optics 98 Add-On Reflector.Met de Dimlux Ultra Optics 98 Add-On Reflector minimaliseert u reflectieverliezen door uw reflector uit te breiden. Deze Add-ons zijn gemaakt van Miro 95 Hammerhead spiegels en hebben een reflectiviteit van maar liefst 95%. De Add-on reflectoren zijn eenvoudig te monteren op de verstelbare reflectoren van de Ultra Optics 98. De add-on reflectoren zijn verkrijgbaar in 2 varianten. Een is voor de lange/zijkant zijdes en de andere voor de korte zijdes van de lamp en worden verzonden per 2 stuks.

Read more less