Description
Why are the Adjust-A-Wings the best reflectors?
Adjustable double parabolic reflector.
The adjustment of the reflector is done with a stainless steel cable through the keyholes in the hood. As a result, the hood is stretched like an arc from wide to downlight. Due to the perfect double parabolas, which are created after installation, there is a better and wider distribution of the light and better even heat dissipation around the lamp.
Flexible glass-coated aluminum.
A thin, flexible layer of glass is applied to the aluminum on the inside of the reflector plate. Due to this costly processing, the aluminum is 97% reflective and the aluminum is protected against corrosion. This guarantees reflection for years to come. Maintenance is easy by just cleaning with a soft cloth and glass cleaner.
Gives a wider, even spread of light
By adjusting Adjustawings with the cables you can make a deep-beam reflector and a wide-beam reflector. If the lamp hangs high above the crop, a downlight is required to illuminate a larger surface intensely. But when the lamp gets closer to the crop, the hood must be wider to illuminate a wider area.
So the hood, high above the crop, is more curved, like a downlight. The lower on the crop (up to 20 cm from the crop), the more the hood must be open or wide, as a floodlight, to also illuminate the outer edges of the area. All this is of course in combination with the use of Super Spreader.
Adjustable lamp holder.
When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder ensures fine tuning of the light distribution.
