Lighting
Replacement cap for Dimlux 315w and 600w (Alpha Optics 98)
Is the hood of your Dimlux 315w or 600w damaged or simply no longer optimal? Then it is smart to replace it with a new one.
28,95
Replacement shade Dimlux 1000w (Alpha Optics 98)
Is the cover of your Dimlux 1000w damaged or simply no longer optimal? Then it is smart to replace it with a new one.
29,95
Wing cap Medium
Think of this as the budget version of the Adjust-a-wing. Great reflector, for a perfect price!
35,95
Adjust-a-Wing Large, complete with fitting and spreader
Why are the Adjust-A-Wings the best reflectors? Adjustable double parabolic reflector. The adjustment of the reflector is done with a stainless steel cable through the keyholes in the hood. As a result, the hood is stretched like an arc from wide to downlight. Due to the perfect double parabolas, which are created after installation, there is a better and wider distribution of the light and better even heat dissipation around the lamp. Flexible glass-coated aluminum. A thin, flexible layer of glass is applied to the aluminum on the inside of the reflector plate. Due to this costly processing, the aluminum is 97% reflective and the aluminum is protected against corrosion. This guarantees reflection for years to come. Maintenance is easy by just cleaning with a soft cloth and glass cleaner. Gives a wider, even spread of light By adjusting Adjustawings with the cables you can make a deep-beam reflector and a wide-beam reflector. If the lamp hangs high above the crop, a downlight is required to illuminate a larger surface intensely. But when the lamp gets closer to the crop, the hood must be wider to illuminate a wider area. So the hood, high above the crop, is more curved, like a downlight. The lower on the crop (up to 20 cm from the crop), the more the hood must be open or wide, as a floodlight, to also illuminate the outer edges of the area. All this is of course in combination with the use of Super Spreader. Adjustable lamp holder. When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder ensures fine tuning of the light distribution.
145,95
Adjust-a-wing hood Medium, complete with fitting and spreader
Why are the Adjust-A-Wings the best reflectors? Adjustable double parabolic reflector. The adjustment of the reflector is done with a stainless steel cable through the keyholes in the hood. As a result, the hood is stretched like an arc from wide to downlight. Due to the perfect double parabolas, which are created after installation, there is a better and wider distribution of the light and better even heat dissipation around the lamp. Flexible glass-coated aluminum. A thin, flexible layer of glass is applied to the aluminum on the inside of the reflector plate. Due to this costly processing, the aluminum is 97% reflective and the aluminum is protected against corrosion. This guarantees reflection for years to come. Maintenance is easy by just cleaning with a soft cloth and glass cleaner. Gives a wider, even spread of light By adjusting Adjustawings with the cables you can make a deep-beam reflector and a wide-beam reflector. If the lamp hangs high above the crop, a downlight is required to illuminate a larger surface intensely. But when the lamp gets closer to the crop, the hood must be wider to illuminate a wider area. So the hood, high above the crop, is more curved, like a downlight. The lower on the crop (up to 20 cm from the crop), the more the hood must be open or wide, as a floodlight, to also illuminate the outer edges of the area. All this is of course in combination with the use of Super Spreader. Adjustable lamp holder. When adjusting the reflector, the lamp holder can also be adjusted. The vertically adjustable lamp holder ensures fine tuning of the light distribution.
75,95
Mirror cap
Who doesn't know him, the familiar mirror cap. Easy to hang and good quality.
9,25
Hammered cap
The old trusted hammer cap. works perfectly for 400w, 600w single end bulbs.
9,25
Lumen King Master controller
With the Lumen King Master controller you can control two lighting groups in a room. Lumen King Master Controller With the Lumen King Master controller you can control two lighting groups in a room. The master controller controls your lights, so you can set from what time the lights go on and when they go out again. The controller also has the ability to simulate the sunrise and sunset cycle from 10-60 minutes. Each of the two illuminated group channels has an overheating protection function that can be set as required. You can use the touch screen to easily view and adjust the current settings for each channel. In addition, the controller is portable, easy to install and operate. Technical specifications for Lumen King LED & HPS fixture Control voltage outputs: 2 groups.
244,95
Ralight LED controller
Useful! A controller to operate the lighting from 1 place. With the controller you can control two lighting groups in a room. The controller controls your lights, so you can set from what time the lights come on and when they go out again. The controller also has the ability to simulate the sunrise and sunset cycle from 10-60 minutes. Each of the two illuminated group channels has an overheating protection function that can be set as required. You can use the touch screen to easily view and adjust the current settings for each channel. In addition, the controller is portable, easy to install and operate.
219,00
DIMLUX MAXI CONTROLLER EVO 1.2
DimLux Maxi Controller EVO 1.2. This revolutionary controller for DimLux can control up to 160 DimLux Extreme or Expert Series and can be expanded with various sensors so that optimum conditions are constantly achieved. DimLux Maxi Controller EVO 1.2. Comes standard with a 5 meter Interlink cable. The use of one or more DimLux Expert Series in combination with the DimLux Maxi Controller has a number of fantastic advantages: Extensive and accurate setting options Sensors: measuring = knowing Extensive connection and control options Simulation of sunrise and sunset Energy and cost savings
249,95
OCL touchscreen controller
The OCL Touch Screen controller is the successor to the DLC 1.1 controller and is made for easy and professional operation/switching of OCL grow lights. Enormous possibilities such as imitating sunrise or sunset. This controller can be used for both HPS and LED grow lights. Temperature monitoring, so safe! With the OCL Touch Screen controller you have full control over your grow room. When a problem arises with the air conditioning and/or extraction, the controller quickly notices this. By means of a supplied temperature sensor, the lamps will dim or even switch off completely at a set temperature. This can save you a lot of trouble! Capabilities OCL Controller Set on and off times (light cycles) Dim lighting at set temperature Switch off lighting at set temperature Simulate sunrise and sunset Can be used for 2 rooms
395,00
Lumatek Digital Panel PLUS 2.0
With the Lumatek Digital Panel PLUS 2.0 you get ultimate control over your lighting sets. Lumatek's innovative lighting controller is specially designed for use in combination with the Lumatek Zeus LED and HID grow lights. The controller monitors, among other things, the temperature and the light intensity, automatically regulates the light intensity (accurate to the percent) of your grow lights and is equipped with an automatic on-off function. The advanced piece of technology is easy to connect to up to 400 luminaires, with 2 separate zones.
374,95